Ruger 10/22 Archangel Ars Conversion Package

Buy It Now: $299.99

If you want to make your Ruger 10/22 have that “black rifle” tactical look then check out this Archangel ARS conversion package.  It not only gives you that classic AR-15 look but also allows for plenty of accessory attachments to meet all of your tactical needs.

All you have to do is {get rid of|remove} the 10/22 barreled action from the {plant’s|factory} stock and {lower|drop} it into the Advanced Rimfire System’s lower receiver housing/pistol grip unit made of {durable|tough}, reinforced molded polymer.

Install the upper receiver housing with integral Picatinny rail that accepts a broad array of popular tactical optics. The free-float handguard has plenty of oblong cooling vents to keep the barrel from overheating, plus full-length Picatinny rails.

The best thing about this system is that you can install a wide variety of accessories meant for the AR-15/M16 but on a Ruger 10/22 style rifle.  This way you can use the more economical .22 LR ammo while honing your tactical skills.

Features:

• Made from tough reinforced polymer
• Fits Ruger 10/22 barreled action with standard sized barrel
• Free float handguard has plenty of oblong cooling vents
• Full length Picatinny rails for plenty of accessory {installation|mounting} options
• 15′ of uninterrupted space for accesory mounting
• Gas block style of Picatinny rail
• More . . .

SPECS: Molded high-impact polymer, matte black. Fits Ruger 10/22 barreled action with standard barrel. Mounting hardware and complete instructions included.

Replacement Rifle Stock

Buy It Now: $118.99

There’s no reason to leave your classic military rifle in the gun cabinet anymore with this replacement stock from Boyd’s.

Their superb design comes in the finest American walnut and gives your rifle the performance and look you’ve been looking for.  Boyd’s sells three versions of this replacement stock:

• 1903 Springfield:  A military-type, straight grip design based on the features of the M1903 and M1903A3 with no finger grooves; handguard fits M1903 only.
• M1 Garand:  {extra-large|oversized}, Korean War style contours and comesas a 3-piece set with buttstock, plus front and rear handguards.
• Mauser:  The small and large ring Mauser stocks have a comfortable contour with cheekpiece for right-handed shooters. Mauser 95 features a hard plastic buttplate, Mauser 98 has a thin, rubber recoil pad. Both are inletted for military contour barrels and have a 13¾” length of pull. .

For best fit, have your gunsmith or epoxy fit to bed yourself. More . . .

SPECS: American walnut. Finished (F) – 100% fit and sanded to an in-house action for drop-in installation, military oil finish. Unfinished (UF) – Rough sanded. Virtual Inlet (VI) – Precision machined but not fit to in-house action, may require minor fitting. Semi-Inlet (SI) – Completey shaped, 95% inletted, requires fitting of wood-to-metal

Overmolded Rifle Stock

Buy It Now: $149.95

Classic-style, straight line stock with rubber skin overmolded on fiberglass shell, is warm to the touch and won’t become slippery when wet.

Non-slip rubber surface provides an enhanced grip, plus it is extremely quiet. Pebble finish, textured panels along the wrist and forend provide additional grasping surface. Fully inletted for a drop-in fit.

Pillar model features molded in, aluminum bedding posts at front and rear action mounting points. Full Block model has an accuracy improving, CNC machined, full-length aluminum bedding block that extends from the action to the forend.

All models feature rubber recoil pads.

Magic Springs By Seven Rossi & Navy Arms ’92 Rifles Mainspring

Order Now: $20.00

Reduced power mainspring gives lower cocking effort and smooth, consistent cycling.

Wound from flat-wire for uniform compression through its entire range. Give popular Cowboy Action rifles a smooth-feeling, slick-working action. #0792 fits .38 Special/.357 Magnum. #0892 fits .44 Magnum/.45 Colt rifles.

SPECS: Spring steel. Nylon spacers. (more . . .)

Magic Springs By Seven Marlin Lever Action Competition Mainspring

Order Now: $20.00

Competition-grade, reduced power mainspring gives lower cocking effort and smooth, consistent cycling.

Wound from flat-wire for uniform compression through its entire range. Four models for lever action rifles using a compression-type mainspring.

Includes two, nylon spacers for tuning spring tension. Four weights based upon cartridge, primer and caliber: .38/.357 for cartridges using small pistol primer; .44/.45 for cartridges using large pistol primer; Rifle for centerfire rifle calibers; .22 Rimfire for lever action rimfires.

SPECS: Spring steel. Nylon spacers. Fits all current production lever action rifles with coil-type main spring. (more . . .)

Lee Shaver Globe Sight Inserts

Order Now: $20.00

Developed specifically for silhouette shooters using popular globe front sights.

Thinner, more versatile crosshairs, posts and apertures do away with thick, bulky insert; won’t hide that 500 meter ram or tiny “black” you need to hit.

SPECS: 1095 high-carbon, spring steel, blued. .01″ (.25mm) thick. Post & Aperture Card includes 3 apertures, 4 crosshairs, 3 posts. Lyman 17A also fits Browning BPCR. .470″ (12mm) dia., Redfield/Alley – .550″ (14mm) dia. Fits Redfield 65/66 and Alley globe sights. Large Lyman/Anschutz – .675″ (17.1mm) dia., Parker-Hale – .587″ (14.9mm) dia., Redfield Olympic – .700″ (17.8mm) dia., Redfield International/Mid Tompkins – .769″ (19.5mm) dia. All Aperture Card features 10 apertures, from .072″ (1.8mm) dia. to .145″ (3.7mm) dia. Models for Redfield International/Mid Tompkins and Redfield Olympic. (more . . .)

Galazan #S150 Replacement Gun Screw Kit

Order Now: $20.00

Winchester Model 92. Nine action screws. Matte blue. (more . . .)

Marble Arms Flat Top Folding Leaf Sight With Windage

Order Now: $20.15

Folds down when not in use.

Strong spring secures sight in “up” or “down” position. The reversible notch piece gives choice of “U” or “V” notch.

Three styles and two heights of these sights are available and fit most standard rear sight dovetails. The chart shows the overall sight height for those sights below.69 & 69W – Height, .360″ (9.1mm) to .490″ (12.4mm).69H & 69WH – Height, .460″ (11.7mm) to .590″ (15mm). Flat Top Folding Leaf Sight w/ Windage – No.69W -”W” indicates Windage and can be used wherever No. 69 sights are indicated in Marble sight chart. No.69WH -”H” indicates “high” and can be used wherever No. 69H is indicated. “H” is .096″ (2.4mm) higher.No.69WEH – “H” indicates “high” and can be used wherever No. 69H is indicated. “H” is .096″ (2.4mm) higher. “E” indicates elevation adjustable; .538″ to .657″. (more . . .)

Doug Koenig Shooting Sports 10/22 V-Block

Order Now: $20.17

Provides a tighter barrel/receiver lockup for improved accuracy.

Holds barrel firmly in position, won’t shoot loose or break when torquing into place. Replaces factory block with no modification to gun or stock.

SPECS: O-1 steel, in-the-white. .880″ (22.4mm) long, .5″ (12.7mm) wide. (more . . .)

Marlin Locking Bolt

Order Now: $20.46

LOCKING BOLT (more . . .)