The Beta Company Ar-15/M16 C-Mag

Order Now: $289.99

Super-capacity, dual drum magazine allows you to spend more time shooting and less time reloading. 100-round capacity is great for extended shooting sessions with inexpensive surplus ammunition.

Even weight distribution ensures a well-balanced weapon that’s not cumbersome or awkward to shoot. Included tool provides easy loading, simply push five rounds at a time into the interlinking straight clip to automatically double stack and alternately load both drums.

Polymer composite body is available in solid Black, or black with a Clear drum face to allow visual check of remaining ammo. Steel hardware and aluminum feed rails provide years of reliable service.

Includes two tubes of graphite lubricant for optimal feeding, plus a snap-on, synthetic cover to keep dirt from entering the follower end of the magazine.

Double-stitched, nylon carry case attaches to your web belt and includes individual compartments for the magazine, loading tool, and graphite tubes.

Check out the 360 Image of The Beta Company C-Mags. Check out the segment from Jerry Miculek Practical Rifle where he demonstrates proper technique for shooting off of rooftops using a C-Mag.

SPECS: Polymer composite body, aluminum feed rails, steel hardware.

Available with solid black housing or black with clear drum face.

Accepts .223 caliber. 2-5⁄8" (6.7cm) long, 10” (25.4cm) wide, 4” (10.2cm) high. 2.24 lb. (1kg) weight. (more . . .)

Sadlak Industries M14/M1A Tactical Scope Mount

Order Now: $289.99

Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly, without alteration, to the side receiver ring, charger guide dovetail and receiver mount lug.

Precision-cut rail includes 5 angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights.

Airborne Mount features a lightweight skeletonized frame with seven, 3/8" diameter CNC machined lightening holes in the top of the rails for reduced weight without sacrificing strength. Rigid, one-piece mount provides a rock-solid platform that won't shift your point-of-aim from shot-to-shot.

Precision machined from chrome-moly steel bar stock and heat-treated to Rc 50 for superior strength. Mil-Spec Parkerized finish resists abrasion and corrosion. Adopted by the 101st Airborne.

Aluminum Mount is machined from 7075 bar stock aluminum and hardcoat anodized matte black for durability. Titanium Mount is made from high quality, hot-forged billet, not a casting. Heat treated to Rc 34.

Black nitride hardcoat resists abrasion and corrosion. SPECS: 5-7⁄16" (13.8cm) long, 2" (5.1cm) wide, 1 " (4.4cm) high. Airborne Mount - Steel, chrome-moly, Parkerized, black, matte finish. 9.4oz. (266g) weight.

Aluminum Mount - 7075 aircraft aluminum bar stock. Hard coat anodized, black, matte finish. 4.3 oz. (123g) weight.

Titanium Mount - Black, nitride finish. Base hardness Rc. 34, surface hardness Rc 85. Weighs 7.3 oz. (207g).

Includes mounting hardware, Allen wrenches, and complete instructions. (more . . .)

Brownells Water Displacing Oil "After-Bluing" Rust Prevention

Order Now: $289.99

The real professional - and longtime favorite - "after-bluing", one-step oil and protection treatment. Specially formulated; the molecules of oil actually displace the molecules of water still on the surface of the gun as it comes out of the final hot water rinse.

Gives the gun a completely protected surface, ensuring your time spent on polishing and bluing will not be spoiled by rust under the oil. Also a superior rust preventive which neutralizes fingerprints, body acids and oils from handling and shooting.

Provides a protective film with that proper "oiled and protected" feel preferred by many serious shooters and gun people. The standard by which other "after-bluing" oils are judged.

SPECS: Net contents; 1 qt. (946ml) or 1 gal. (3.8L) in metal can, 5 gal. (19L) in bulk container. (more . . .)

Surefire M4 Devastator

Order Now: $292.53

Brilliant white light from 225-lumen, high-output lamp (included) or 350-lumenn, ultra high-output lamp (optional) .

Special shock-isolation for lamp protects against failure from recoil or impact. Precision 2.5"" micro-textured reflector creates tight, smooth, extended-reach beam.Coated tempered window resists impact, maximizes light.

CB model available with crenellated Strike Bezel .High-strength aerospace aluminum body, Mil-Spec hard-anodized for extreme durability.Tactical tailcap switch-press for momentary-on, twist for constant-on.Weatherproof O-ring and gasket sealing.

Includes high-energy 123A batteries with 10-year shelf life.

SPECS: Output / Runtime; MN60 Lamp 225 .0 lumens / 60 minutes; MN61 Lamp 350 .0 lumens / 20 minutes; Length 9 .2 inches; Bezel Diameter 2 .50 inches; Weight w/Batteries 11 .6 ounces; Batteries 4. (more . . .)

Manson Precision Piloted Tap/Mandrel

Order Now: $295.95

Recuts and squares receiver threads concentric with centerline of boltway. Pilot with bushings centers tap. Available Standard or .010" Oversize.

SPECS: High speed steel. Tap - TiN coated 10 " (26.6cm) long. Includes (2) bushings, .701"-.705" diameter. .010" Over - 1-1⁄16" + .010"-16 thread pitch. Standard - 1-1⁄16"-16 thread pitch. (more . . .)

Crimson Trace Corporation S&W N-Frame Laser Grips

Order Now: $299.00

The LG-313 "Hoghunter" LaserGrips are designed especially to fit Smith & Wesson N Frame revolvers with a square butt, while offering the latest Crimson Trace designs for comfort and battery life. (more . . .)

Crimson Trace Corporation S&W K/L-Frame Laser Grips

Order Now: $299.00

The LG-307 LaserGrips are designed especially to fit Smith & Wesson K and L Frame revolvers with a square butt, while offering the latest Crimson Trace designs for comfort and battery life.

Please see our fit notes for help determining which revolver you have. (more . . .)

Crimson Trace Corporation Ruger Replaceable Laser Grip Panels

Order Now: $299.00

The LG-344 Lasergrips for select double-action Ruger revolvers feature Crimson Trace's rubber overmold construction around a sturdy polymer grip frame.

These Lasergrips provide equal comfort and control as the stock Ruger grips, and they are compatible with your stock Ruger wood panels for that classic Super Redhawk style. Replacement panels available direct from Ruger. (more . . .)

Crimson Trace Corporation Ruger Lcr Lasergrips

Order Now: $299.00

When Ruger decided to break the ice with a revolutionary new polymer revolver for concealed carry, they set out to launch the product with Lasergrips available from day 1.

That committment to our products serves as further validation that for compact concealed carry guns, a laser sight is one of the best purchases you can make.

Whether for training or defense, this front-activated LG-411 Lasergrips model offers our very best. (more . . .)

Crimson Trace Corporation Ruger Laser Grip

Order Now: $299.00

The LG-303 Lasergrips represent a significant upgrade to our offerings for the Ruger SP-101 revolver . These new Lasergrips feature our latest rubber overmolded material for a comfortable and reliable grip, and can be installed in seconds. (more . . .)